Aquati 5 Stage RO DI resin reverse osmosis water filter system 50/75/100/150GPD

Aquati 5 Stage RO DI filter is ideal for preparing water for saltwater and freshwater aquariums. The filtered water is clear, soft and free of contamination. Due to the fact that reverse osmosis is a 100% natural process, the filtration does not involve any chemicals.

Designed to provide your fish tank with water of highest quality.

The filter kit comes complete with the following:

– 5 Stage Reverse Osmosis water filtration system
– 3x 2 meter lengths of tubing (white, red, blue)
– Mains connector: 3/4″ to 1/4″ adapter – to connect onto your 3/4″ hosepipe outlet /garden tap / or 3/4″ to 1/4″ in-line connector or self piercing valve
– Waste water clamp
– Water flow restrictor to the osmosis membrane
– Housing spanner – to open the pods when pre filters need changing
– Housing spanner – to open the Reverse Osmosis membrane filter housing

Filters’ Specifications:

Filter 1: 10″ polypropylene foam filter cartridge removes sand, rust, silt and other sediments up to 5 Micron

Filter 2: 10″ activated carbon block filter. The carbon is formed in specially pressured, high density blocks to gain high adsorption rate of chlorine, other chemicals and multiparticle organic substances.

Filter 3: 10″ activated carbon filter removes 98% to 99% of free chlorine, chlorinated solvents, aromatic hydrocarbons, as well as up to 85% of pesticides of chlorogenic origin, polyaromatic compounds, phenol, benzene and organic substances.

Filter 4: Reverse Osmosis high quality membrane (we offer 50, 75, 100 and 150 GPD membranes). The membrane holds up to 99% of contamination from feed water. It successfully removes harmful organic and non-organic compounds, heavy metals and some bacteria and viruses. The efficiency of the membrane is shown in GPD units (gallons per day)

Filter 5: In-line deionizing cartridge filled with high quality DI resin for complete demineralization of water. Openable housing – you can refill the cartridge with media on your own

The recommended replacement cartridges /depends on water usage and its condition/:

-Pre filters: every 4-6 months
-RO membrane: every 2-3 years

Aquati 5 Stage RO DI  Water Filter is a complete, ready to use device.

System’s Specifications:

– Filtration stages: 5
– Pressure: 2.8- 6 bar
– Water temperature 2-45°C
– pH range: 4-10
– capacity (at optimal conditions) up to 50GPD- 150GPD – depending on the selected membrane
– Filter size: height 44 cm, width 40 cm, depth 15 cm