Description
Aquati 4 Stage Large RO DI Reverse Osmosis Pure Water Filter
/50 75 100 150 GPD/
Designed to provide highest quality water.
The filter kit comes complete with the following:
– 4 Stage Reverse Osmosis DI water filtration system
– 3x 2 meter lengths of tubing (white, red, blue)
– Mains connector
– Housing spanner
– Waste water clamp
– Flow restrictor to the RO membrane
Filters’ Specifications:
Filter 1: 10″ polypropylene foam filter cartridge removes sand, rust, silt and other sediments up to 5 Micron
Filter 2: 10″ activated carbon block filter. The carbon is formed in specially pressured, high density blocks to gain high adsorption rate of chlorine, other chemicals and multiparticle organic substances.
Filter 3: Reverse Osmosis high quality membrane (we offer 50, 75, 100 and 150 GPD membranes). The Vontron membrane holds up to 99% of contamination from feed water. It successfully removes harmful organic and non-organic compounds, heavy metals and some bacteria and viruses. The efficiency of the membrane is shown in GPD units (gallons per day)
Filter 4: Transparent 10″ housing with demineralizing bed container (easy replacing) filled with high quality DI resin for complete demineralization of water. Openable housing – you can refill the cartridge with media on your own
Aquati 4 Stage RO Reverse Osmosis Water Filter is a complete, ready to use device.
The recommended replacement cartridges /depends on water usage and its condition/:
-Pre filters: every 6 months
-RO membrane: every 2 years
Quick and easy to install.
System’s Specifications:
-Filtration stages: 4
– Pressure: 2.8-6 bar
– Water temperature 2-45°C
– pH range: 4-10
– capacity (at optimal conditions) 50GPD- 150GPD – depending on the selected membrane
– Filter size: height 40 cm, width 40 cm, depth 15 cm
-Safety standards compliant
Quick and easy to install.
